Mods

Firewall A/C Passthrus

  • Allan 
  • A/C, Mods
  • Hours logged: 2

I am routing the A/C lines down the tunnel and on top of the tunnel cover under the panel. Bill from Airflow Systems kindly sent me straight fittings instead of the 45 degree fittings that are supplied for the hose… Read More »Firewall A/C Passthrus

A/C Evaporator Installation

  • Allan 
  • A/C
  • Hours logged: 30

I am installing an Airflow Systems ASAC-5000 air conditioning system in the airplane. This log entry describes work that has been completed over several work sessions and documents the installation of the A/C evaporator and my solution for switching the… Read More »A/C Evaporator Installation

Rear NACA Ducts

  • Allan 
  • A/C
  • Hours logged: 2

As many others have done, I am adding rear NACA ducts to supply pressurized air to the overhead console. I used the opening in the forward fuselage skins to make a template. I decided to place the forward edge of… Read More »Rear NACA Ducts

Oxygen Fill Port

I have decided to install an oxygen system in the airplane and I have selected the Mountain High EDS-4ip Pulse Demand system. I want to be able to fill my own oxygen via a cascading fill system in the hangar… Read More »Oxygen Fill Port

A/C Line Routing

After a lot of research from other builds, I finally settled on a plan for routing the air conditioning lines. A primary objective for me in the build is to ensure that systems in the airplane are accessible for inspection… Read More »A/C Line Routing

A/C Scoop Attached

  • Allan 
  • A/C
  • Hours logged: 0.8

I need to finalize the routing of conduit and the A/C lines before I attach the baggage compartment floors. I decided to attach the A/C condenser scoop to the bottom of the fuselage so that I can align the hoses… Read More »A/C Scoop Attached