forecast=25
The aileron and elevator gap fairings were ready to be installed so I started riveting these into place. The rivets were easy to set until I got to those under the inboard bottom wing skins (which are already riveted into… Read More »Wing Gap Fairings
When I inspected the quick build wings I noticed a few steps that had been missed. One of those was the installation of nutplates where the wing root covers attach. The lower screw holes are to be dimpled and the… Read More »Wings Parts Prep
While waiting for some parts, I got the bottom wing skins ready. I also needed to determine where I would mount the Garmin GAP 26 Pitot/AoA. This section starts with the aileron and flap gap fairings. These are the first… Read More »Bottom Wing Skins/Pitot Tube
I will be using a Garmin pitot probe with AoA so I don’t need the stock stall warning system. This requires me to fill the pilot holes on the leading edge of both wings (where the stock sensor would be… Read More »Stall Warning Holes Filled, Tanks Reinstalled
