forecast=12
I had prepped all of the control system parts previously so the install was a matter of fetching the right hardware and getting things assembled. I first set the lengths of the rod end bearings on the forward pushrod assembly… Read More »Control System
I worked on some miscellaneous tasks today. The first was making a doubler for mounting two Garmin GSU 25 LRUs to the left side of the subpanel. These need to be mounted securely so I made a large doubler to… Read More »ADAHRS Doubler, Control Sticks
I got another batch of parts primed today and ready to rivet. Priming the inside of the pushrods was a bit challenging and I’m not sure how well I got them primed but I can’t see anything shiny inside when… Read More »More Parts Primed
I decided to jump ahead and start working on the control system so that I can get a better understanding of the clearances that I will need before making holes for conduit and A/C lines. I cut the push rod… Read More »Push Rods and Elevator Idler
