forecast=5
Now that the fuel lines and brake lines are in, it was time to install the rudder cables. These are threaded in from the aft of the tailcone. The protective sleeves are secured with Adel clamps. I’ll cover the exterior… Read More »Rudder Cables
I had previously purchased brake lines from Aircraft Specialty and it was now time to get them installed. I will install the lines from the parking brake to the pedals when I final-install the pedals (after painting the interior). The… Read More »Brake Lines
While I had the upper forward off, I decided to fit the parking brake cable. I had previously mounted the valve and reclocked the arm on the valve to allow the cable to be routed from the right. I am… Read More »Parking Brake Cable
I am installing a parking brake (Matco PVPV-D) and I made a custom bracket that allows me to install a limit switch that will connect to my EFIS. I designed the bracket in OnShape using the measurements from the parking… Read More »Parking Brake Bracket