forecast=6,complete=true
I had previously prepared the fuselage flap system parts but I hadn’t installed them as I wasn’t sure what I needed to paint at the time. I primed the interior of the torque tubes and installed the parts. This section… Read More »Flap System
I aligned and drilled the holes for the flap crank and torque tubes. For the flap crank holes I drilled to 1/8, then #13, then reamed to 3/16″. For the flap horn holes I drilled to 1/8, then #13, then… Read More »Flap Torque Tube
I completed the small task of installing the extensions for the flap actuator. This is easier to do now before the bottom skins are riveted into place. I riveted the nutplates to the extensions with the pneumatic squeezer. I then… Read More »Flap Actuator Extensions Installed