forecast=15
I am installing the Van’s RV-10 Electric Aileron Trim Kit (EA-10 KIT) in the right wing to keep it in the same wing as the Garmin GSA-28 roll servo. The kit uses a spring bias mechanism operated with a Ray… Read More »Electric Aileron Trim
I decided to test fit the aileron actuation parts while the wings are still open. This will also allow me to prepare the aileron trim system parts. The aileron torque tube collars are steel parts that need to be primed… Read More »Aileron Actuation Initial Rigging
With the tanks mounted, I’m ready to start installing the aileron actuation parts. I started by preparing the main aileron push rods. I cut these to length then drilled the threaded rod ends. I designed a 3d printed drill guide… Read More »Aileron Actuation Parts
