forecast=40
I am routing the A/C lines down the tunnel and on top of the tunnel cover under the panel. Bill from Airflow Systems kindly sent me straight fittings instead of the 45 degree fittings that are supplied for the hose… Read More »Firewall A/C Passthrus
I am installing an Airflow Systems ASAC-5000 air conditioning system in the airplane. This log entry describes work that has been completed over several work sessions and documents the installation of the A/C evaporator and my solution for switching the… Read More »A/C Evaporator Installation
As many others have done, I am adding rear NACA ducts to supply pressurized air to the overhead console. I used the opening in the forward fuselage skins to make a template. I decided to place the forward edge of… Read More »Rear NACA Ducts
After a lot of research from other builds, I finally settled on a plan for routing the air conditioning lines. A primary objective for me in the build is to ensure that systems in the airplane are accessible for inspection… Read More »A/C Line Routing
I need to finalize the routing of conduit and the A/C lines before I attach the baggage compartment floors. I decided to attach the A/C condenser scoop to the bottom of the fuselage so that I can align the hoses… Read More »A/C Scoop Attached
I finished up the remaining work on the air conditioner condenser scoop and bottom skins today. I split the doublers provided with the Airflow Systems kit and made a cut in the grommets so that they can be squeezed around… Read More »A/C Scoop and Bottom Skin Complete
As mentioned in a previous post, we have decided to install air conditioning in the airplane. This is a fairly significant mod but it is something that I expect will make it a whole lot more enjoyable to travel with… Read More »Air Conditioner Condenser Scoop