I worked on some miscellaneous tasks today.
The first was making a doubler for mounting two Garmin GSU 25 LRUs to the left side of the subpanel. These need to be mounted securely so I made a large doubler to house both of them. I 3d printed a drill template with the specs from the Garmin install manual.
![](https://airplane.allanglen.com/wp-content/uploads/2022/07/pxl_20220717_1945336213055790603707992825.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/07/pxl_20220717_2110135454263747001234610504.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/07/pxl_20220717_214336201780694215695341828.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/07/pxl_20220717_215356314480441510101750739.jpg)
I then fitted and drilled the control sticks. I chose to trim and shape the ends to allow the sticks to be inserted up to the powder coat masking line.
![](https://airplane.allanglen.com/wp-content/uploads/2022/07/pxl_20220718_0123383511778591150328248783.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/07/pxl_20220718_0145539284914731766973204118.jpg)
Two more small tasks complete.