I got another batch of parts primed today and ready to rivet.
![](https://airplane.allanglen.com/wp-content/uploads/2022/02/pxl_20220220_0132504778973043551943293763.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/02/pxl_20220220_013244378677149920478163550.jpg)
Priming the inside of the pushrods was a bit challenging and I’m not sure how well I got them primed but I can’t see anything shiny inside when shining a light through. I used the paint sprayer with a fine mist on higher pressure to slowly coat the insides from both ends.
![](https://airplane.allanglen.com/wp-content/uploads/2022/02/pxl_20220220_0449414662363026295779239352.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/02/pxl_20220220_0449576813799931419802049251.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/02/pxl_20220220_0450016965005036467792647198.jpg)