Elevator Dimpling

Allan
January 1, 2021January 1, 2021
Empennage, Elevators
Hours logged: 2.4

I finished up with deburring the right elevator skin this morning. I then proceeded to dimple all four of the elevator skins.

I also deburred and dimpled the tip rib skins.

Category	Hrs	Progress ^*
Workshop	21.5	100%
Setup	16	100%
Tools	5.5	100%
Empennage	284.7/296	96%
Inventory	2	100%
Vertical Stabilizer	16	100%
Rudder	27.6	100%
Horizontal Stabilizer	47.5	100%
Elevators	65.4	100%
Tail Cone	88.3	100%
Attach	21.9/23	97%
Fairings	26/27	96%
Fuselage	390.2/461	85%
Inventory	4.5	100%
Mid Fuse	64.3	100%
Firewall	24	100%
Fwd Fuse	40	100%
Side Skins	74.3	100%
Steps	4.2	100%
Upper Fwd Assembly	12/16	75%
Tail Attach	9	100%
Baggage Area	29.5	100%
Baggage Door	13	100%
Covers & Floor Panels	28/29	97%
Brake Lines	10/10	98%
Fuel System	9/10	90%
Rudder Pedals	1/4	25%
Control System	15.2/16	96%
Flap System	2.8/6	47%
Upper Fwd Install	0/20	0%
Rear Seat Backs	7	100%
Cabin Top	56.4/80	71%
Wings	18/64	28%
Fuel Tanks	14	100%
Bottom Wing Skins	0/25	0%
Aileron Actuation	0/10	0%
Wing Tips	0/10	0%
Pitot/AoA	0/5	0%
Finish Kit	19/203	9%
Cabin Door Safety Latch	0/20	0%
Engine Mount	3	100%
Landing Gear	0/10	0%
Spinner and Cowling	0/80	0%
Gear Leg and Wheel Fairings	0/80	0%
Seat Belts	0/8	0%
Inventory	2	100%
Firewall Forward	10/144	7%
Oil Cooler	6/6	96%
Mount Engine	0/10	0%
Cowl Baffle	0/40	0%
Control Cables	0/8	0%
Fuel System	0/20	0%
Oil System	0/10	0%
Exhaust System	0/20	0%
Sensors/Instrumentation	0/20	0%
Preheater	0/10	0%
Avionics/Wiring	40.4/150	27%
Mods	14/78	18%
Oxygen	8/30	27%
A/C	45.8/48	96%
Total	797.8/1418	56%

* Based on hours reported by other builders. I have averaged 5.92 hrs/week (0.85 hrs/day) which suggests completion by March 2025.