forecast=5
I upgraded to an Airflow Systems 2007X oil cooler and previously installed the modified mount. I made spacers for the bolts from AT6-058X5/16 and installed the oil cooler. I used a short bolt for the lower right as a full… Read More »Oil Cooler
I am installing Heat Shield Products Lava Mat on the firewall to help mitigate heat in the tunnel. I don’t know how much it actually helps but it adds a layer between the heater bypass valves and the tunnel and… Read More »Firewall Heat Shield
Edit: I changed this to be controlled with a push/pull control cable instead. I will be using a TCW linear servo and a butterfly valve to control airflow to the oil cooler. This was a simple install with a single… Read More »Oil Cooler Butterfly Valve
I upgraded to the Airflow Systems 2007X oil cooler which provides more cooling capacity than the stock cooler. This requires a modification to the oil cooler mount to accommodate the taller cooler. I removed the top section of the opening… Read More »Oil Cooler Mount Modifications