I didn’t install the scat tube support in the tunnel per the original plans as I am using the Control Approach rudder pedals.
I decided to mount the support to the lower side of the forward tunnel cover to secure the scat tube between the rudder pedal arms.
![](https://airplane.allanglen.com/wp-content/uploads/2022/10/pxl_20221030_0049433291006974813272436310.jpg)
I match-drilled the tunnel cover then dimpled, primed, and riveted nutplates to the support bracket.
![](https://airplane.allanglen.com/wp-content/uploads/2022/10/pxl_20221030_0127170972562163725874123631.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/10/pxl_20221030_0235478036951543651263554684.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/10/pxl_20221030_0236075135326900626177587861.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/10/pxl_20221030_0239040624463675539529312202.jpg)
One more small task complete.