I ended up getting COVID so the plane has sat idle for a while. That also meant I had to cancel a planned trip so maybe I’ll make up for it?
I’m still waiting for primer and I have several completed parts in the backlog. I’m also trying to get color samples for Sherwin Williams JetFlex paint but I’m not having luck getting any supplier to respond.
I decided to do a few small finishing tasks today. The first was drilling the holes for the air vents in the overhead console and the panel. I drilled these with a hole saw.
![](https://airplane.allanglen.com/wp-content/uploads/2022/07/pxl_20220716_1856094386949881214487429934.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/07/pxl_20220717_0337277105946730929162162052.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/07/pxl_20220717_0338124198457309566677354612.jpg)
I also cut openings for defrost/ventilation fans in the dash. I will be installing 120mm computer case fans.
![](https://airplane.allanglen.com/wp-content/uploads/2022/07/pxl_20220716_2001537745567322820234908590.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/07/pxl_20220716_2218385395806269783025806822.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/07/pxl_20220716_224936616617497096419185344.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/07/pxl_20220716_2249393843203857889554902273.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2022/07/pxl_20220716_2249480228194980193412848906.jpg)