I started riveting the side skins. This starts with riveting the skins to the stiffeners.
![](https://airplane.allanglen.com/wp-content/uploads/2021/03/pxl_20210331_1434339254457367460015267921.jpg)
The left side is now complete up to the rear of the tailcone where I can no longer back-rivet.
![](https://airplane.allanglen.com/wp-content/uploads/2021/03/pxl_20210401_0401270289197346590641033498.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2021/03/pxl_20210401_0406575021775719443447509864.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2021/03/pxl_20210401_0407174442260566479243399371.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2021/03/pxl_20210401_0407065329165383943597642355.jpg)
The right side is now about 80% complete.
![](https://airplane.allanglen.com/wp-content/uploads/2021/03/pxl_20210401_0407265524568887067117938350.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2021/03/pxl_20210401_0408453896745139086899950364.jpg)
So far, so good.
I started riveting the side skins. This starts with riveting the skins to the stiffeners.
The left side is now complete up to the rear of the tailcone where I can no longer back-rivet.
The right side is now about 80% complete.
So far, so good.