I completed two more steps on page 10-20 this evening. This completes the riveting of the forward bottom skin to the bulkhead frames and to the side skins.
I back-riveted all of these with the exception of the rivets under the j-channels.
![](https://airplane.allanglen.com/wp-content/uploads/2021/04/pxl_20210406_0408298346040883054657406771.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2021/04/pxl_20210406_0408497904973386661338109867.jpg)
![](https://airplane.allanglen.com/wp-content/uploads/2021/04/pxl_20210406_0408557446502095514560645081.jpg)
The rivets came out great and the side skins are tight against the bottom skin.